Appendix, Connecting to a component video output, E “connecting to a component – Casio XJ-A142 User Guide User Manual
Page 72: Video output” on pa, Xj-a series xj-m series
72
Appendix
This section explains how to establish a component video connection between the projector and a
video device.
z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match
the colors of the plugs on a component video cable with the colors of the terminals (Green: Y;
Blue: Cb/Pb; Red: Cr/Pr).
z Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
XJ-A Series
XJ-M Series
Connecting to a Component Video Output
Projector
COMPUTER terminal
AV terminal
Bundled special AV cable
Component video cable (commercially available)
To component video
output terminals
To audio output
terminals
Video device
Yellow
(Not connected)
Red
White
Projector
AUDIO IN terminal
COMPUTER IN terminal
Stereo mini plug
Ù
Pin plug type audio cable
(commercially available)
Component video cable (commercially available)
To component video
output terminals
To audio output terminals
Video device
Red
White