Casio XJ-A142 User Guide - Manual (Page 67)

67
Troubleshooting
Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see “Error Indicators and Warning Messages” (below).
Indicators
When the indicators appear
like this:
It means this:
POWER/
STANDBY
LIGHT TEMP
You have just plugged the AC power cord into a power outlet. Wait
until the projector enters the standby state (see below) before trying
to turn on power.
z z z
Red Amber Amber
z c c Standby state: The AC power cord is plugged in and the projector is
in standby.
Red
z z Projector is warming up after being turned on.
Green Amber Amber
z c c Projector is on and standing by for use.
“Off” is selected for the projector’s Eco Mode (page 53) setting.
Green
z z c Projector is on and standing by for use.
“On (Auto)” or “On (Manual)” is selected for the projector’s Eco Mode
(page 53) setting.
Green Green
c c Projector is performing internal power down processes.
Red
z : Lit : Flashing c : Unlit