Epson DUALJET HYBRID SYSTEM PRO 4880 - Manual (Page 7)

vii
Sawgrass Technologies, Inc. ~ ArTainium ® /ChromaBlast ® DualJet™ Hybrid System 4880
IMPORTANT – READ CAREFULLY:
This product is for commercial use only.
This Process License Agreement (“PLA”) is a legal agreement between you and Sawgrass
Technologies, Inc. (“Sawgrass”). By installing the ArTainium ® /ChromaBlast™ cartridge
in your printer, or otherwise using the Sawgrass ArTainium ® /ChromaBlast™ ink, you
agree to be bound by the terms of this PLA. If you do not agree to the terms of this PLA,
Sawgrass is unwilling to license the process of using the ArTainium ® /ChromaBlast™
ink to you. In such event, you may not use the ArTainium ® /ChromaBlast™ ink, and
you should promptly contact your supplier for instructions on return of the unopened
package.
The process of using ArTainium
® /ChromaBlast™ ink is protected by U.S. and foreign
patents. Sawgrass will provide a complete list of the relevant patents upon request. The
use of the ArTainium ® /ChromaBlast™ ink to practice the patented process is permitted
by this license.
1.
GRANT OF LICENSE.
This PLA grants you the following rights:
You may install and use the ArTainium ® /ChromaBlast™ ink packaged herewith
in your EPSON printer to practice the printing process described in U.S. Patent
No. 6,341,856 (“Sawgrass Process”). The use of any ink, dye or pigment to
practice the Sawgrass Process, other than a ArTainium ® /ChromaBlast™ ink
purchased from Sawgrass or its authorized distributor accompanied by a PLA, is
not a licensed use of the Sawgrass Process. No rights to use the Sawgrass
Process, except those specified herein, are granted, and no rights to use any other
process, product, software or hardware developed or sold by Sawgrass are
granted or implied hereby.
2.
LIMITATIONS ON REVERSE ENGINEERING
You agree that you will not attempt to reverse engineer, reproduce or deformulate
the ArTainium ® /ChromaBlast™ ink.
3.
PATENTS AND COPYRIGHTS
Sawgrass owns multiple U.S. and foreign patents which may apply to the
Sawgrass Process and/or the use of ArTainium ® /ChromaBlast™ ink. All
patents in and to the method of using ArTainium ® /ChromaBlast™ ink are owned
by Sawgrass Technologies, Inc. You may not copy the printed materials
accompanying the ArTainium ® /ChromaBlast™ ink. All rights not specifically
granted under this PLA are reserved by Sawgrass Technologies, Inc.
Sawgrass agrees to replace any defective product, or to refund the purchase price, within
a reasonable time, which shall be Sawgrass’ sole responsibility for errors or defects in the
goods. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS OF
PROFIT OR OTHER ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL
OR OTHER SIMILAR DAMAGES.