DJI Mavic Pro - Manual (Page 51)

Flight
Mavic Pro User Manual
© 2016 DJI All Rights Reserved.
51
If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your
aircraft to a different location and try again.
DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
If the aircraft status indicator is blinking red and yellow alternately after placing the aircraft on
the ground, the compass has detected magnetic interference. Change your location.
Auto Takeoff and Auto Landing
Auto Takeoff
Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the
auto takeoff feature:
1. Launch the DJI GO 4 app, and enter “Camera” page.
2. Complete all steps on the pre-flight checklist.
3. Tap “ ”, and confirm that conditions are safe for flight. Slide the icon to confirm and takeoff.
4. Aircraft takes off and hovers at 1.2 meters above ground.
Aircraft Status Indicator blinks rapidly when it is using the Downward Vision System for
stabilization. The aircraft will automatically hover below 13 meters. It is recommended to wait
until there is sufficient GPS before using the Auto Take-off feature.
4. Re-calibrate the aircraft if the aircraft status indicators blink red.
Auto-Landing
Use auto-landing only if the Aircraft Status Indicator is blinking green. Follow the steps below to use the
auto-landing feature:
1. Tap on , to ensure the landing condition is ideal. Slide to confirm.
2. Abort landing process immediately by using the button on the screen.
3. a. When Landing Protection determines that the ground is suitable for landing, the Mavic Pro will
land gently.
b. If Landing Protection determines that the ground is not suitable for landing, the Mavic Pro will hover
and wait for pilot confirmation.
c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when the
Mavic Pro descends below 0.5 meters. Pull down on the throttle or use the auto landing slider to
land.
4. Aircraft will land and turn off automatically.