DJI Mavic Pro User Manual

Page 45

DJI GO 4 App

Mavic Pro

User Manual

Using Virtual Joysticks

Ensure the mobile device has been connected to the aircraft before using the Virtual Joysticks. The

illustrations below are based on Mode 2 (left stick as throttle).

09:29

P-GPS

READY TO GO (GPS)

Virtual Joysticks GUI

Left

Right

Move the aircraft upwards, downwards or rotate to the left or right by pressing on the left half of the

screen. Move the aircraft forwards, backwards or rotate to the left or right by pressing on the right half of

the screen.
Tap on the "

" button to enable or disable Virtual Joysticks.

Launch the DJI GO 4 app and tap the icon on the top right of your screen, then scan the Wi-

Fi QR Code on the front arm to start connection. Note that this feature is available on Android

devices.

When using Wi-Fi in a wide open area with no Electromagnetic Interference, transmission

distance is approximately 262ft (80m) at an altitude of 164ft (50m). The maximum flight speed

is 9mph (14kph), maximum ascent speed is 2m/s and maximum descent speed is 1m/s.

The Wi-Fi frequency of your mobile device can be set to 2.4GHz (default) or 5GHz. On

supported devices, set Wi-Fi to 5GHz for less interference.

Press and hold the linking button for 5 seconds or more to set Wi-Fi password and SSID. Press

and release to rest the transmission frequency to 2.4 GHz.

Using Wi-Fi mode in a wide open area with less Electromagnetic Interference. If the Wi-Fi is

severely affected by the Electromagnetic Interference, use the remote controller to fly your

aircraft instead.

The area beyond the white cycle is also responsive to control commands.