DJI Mavic Pro User Manual

Page 34

Remote Controller

Mavic Pro

User Manual

Position

Flight Mode

SPORT

P-mode

SPORT

S-mode

Flight Mode Switch
Toggle the switch to select the desired flight mode.

Choose between P-mode and S-mode.

P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS

and Forward and Downward Vision Systems to locate itself, automatically stabilize, and navigate between

obstacles. Advanced features such as TapFly and ActiveTrack are enabled in this mode.

Note: P-mode requires larger stick movements to achieve high speeds.

S-mode (Sport): The handling of the aircraft is adjusted in to enhance maneuverability and speed.

Maximum speed is increased to 40mph (65kph). Forward Vision System is disabled in this mode.

The Flight Mode is locked in P Mode by default, regardless of switch position. To switch flight modes, go
to Camera view in the DJI GO 4 app, tap and enable “Multiple Flight Modes”. After enabling multiple

flight modes, toggle the switch to P and then to S to fly in Sport Mode.

The Mavic Pro is fly in P-mode by default every time after powering on. Toggle the Flight Mode Switch to

P and then to S every time before you use S mode.

RTH Button

Press and hold the RTH button to start the Return-to-Home (RTH) procedure. The aircraft will then return to

the last recorded Home Point. Press this button again to cancel the RTH procedure and regain control of

the aircraft.

SPORT