beautypg.com

Preflight checklist – DJI Mavic Pro User Manual

Page 49

background image

Flight

Mavic Pro User Manual

©

2016 DJI All Rights Reserved.

49

GPS Signal Weak

Blinking Yellow

Flight Limits

DJI GO 4 App

Aircraft Status Indicator

Maximum

Flight

Altitude

Height is restricted to 16 feet (5

meters) when the GPS signal is

weak and Downward Vision System

is activated. Height is restricted to

98 feet (30 meters) when the GPS

signal is weak and Downward

Vision System is inactivated.

Warning: Height limit

reached.

None.

Max Radius No limits

If the aircraft flies out of the limit, you can still control the aircraft, but you cannot fly it any farther.

If the aircraft flies out of the max radius, it will fly back within range automatically when

GPS signal is strong.

For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,

city centers, or other sensitive areas. Fly the aircraft only within your line of sight.

No-Fly Zones

All No-Fly Zones are listed on the DJI official website at http://www.dji.com/flysafe/no-fly. No-Fly

Zones are divided into Airports and Restricted Areas. Airports include major airports and flying

fields where manned aircraft operate at low altitudes. Restricted Areas include border lines between

countries or sensitive institute.

GPS Signal Strong

Blinking Green

Flight Limits

DJI GO 4 App

Aircraft Status Indicator

Maximum Flight

Altitude

Aircraft's altitude cannot

exceed the specified value.

Warning: Height

limit reached.

None.

Max Radius

Flight distance must be within

the max radius.

Warning: Distance

limit reached.

Rapid red flashing

when close to the max

radius limit.

Preflight Checklist

1. Remote controller, Intelligent Flight Battery, and mobile device are fully charged.

2. Propellers are mounted correctly and firmly.

3. Micro SD card has been inserted, if necessary.

4. Gimbal is functioning normally.

5. Motors can start and are functioning normally.

6. The DJI GO 4 app is successfully connected to the aircraft.

7. Ensure that the sensors for the Forward and Downward Vision System are clean.