DJI Mavic Pro User Manual

Page 14

Aircraft

Mavic Pro

User Manual

Low Battery RTH

The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that

may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately

when prompted. The DJI GO 4 app will display a notice when a low battery warning is triggered. The

aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The

user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds

for these warnings are automatically determined based on the aircraft’s current altitude and distance from

the Home Point.

The aircraft will land automatically if the current battery level can only support the aircraft long enough

to descend from its current altitude. The user can still use the remote controller to alter the aircraft’s

orientation during the landing process.

The Battery Level Indicator is displayed in the DJI GO 4 app, and is described below:

Battery level Indicator

Critical Low battery level warning

(Red)

Low battery level

warning (Yellow)

Sufficient battery level

(Green)

Remaining flight time

Power requires

to return home

12:29

Smart RTH

Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the on-

screen instructions when GPS is available to initiate Smart RTH. The aircraft status indicator will blink to

display the current status. The aircraft will sense and avoid obstacles on its flight path during Smart RTH.

The aircraft may choose to navigate or hover in place to avoid collision. User can manually navigate the

aircraft to avoid obstacles if the Forward Vision System is disabled or if light levels are low. The pilot can

also immediately exit Smart RTH using the Flight Pause Button on the remote controller or by pressing the

Stop icon in the DJI GO 4 app.

Landing Protection will activate during Smart RTH, Precision Landing and when using Auto Landing in the

DJI GO 4 app:

1. When Landing Protection determines that the ground is suitable for landing, the Mavic Pro will land

gently.

2. If Landing Protection determines that the ground is not suitable for landing, the Mavic Pro will hover and

wait for pilot confirmation.

3. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when the Mavic

Pro descends below 0.5 meters. Pull down on the throttle or use the auto landing slider to land.