DJI Mavic Pro User Manual

Page 24

No Fly Zones

DJI always stresses safety during flight, and has therefore developed

various aids to help users comply with local rules and regulations while

flying. We strongly recommend that you update the firmware to the latest

version to ensure the following features are fully updated:

No Fly Zones

1. No Fly Zones include but are not limited to major airports around

world, borders between two sovereign countries or regions, major

cities/regions, etc.

2. The complete list of No Fly Zones is listed on the official DJI website

at http://flysafe.dji.com/no-fly and is subject to periodic updates in line

with the latest regulatory requirements without prior notice.

3. Some No Fly Zones are comprised of several zones. Each zone features

circles of various sizes. The aircraft will NOT be able to take off in the

inner most zone of the No Fly Zone, and will descend to the specified

altitude when it approaches the edge of the inner most zone. Ground

station functionality is disabled when the aircraft is within a No Fly Zone.

4. Users are NOT able to set up waypoints within No Fly Zones.

Altitude Limit

1. Fly NO higher than 120 meters (400 feet) above ground level and stay

away from any surrounding obstacles.

2. If you intend to fly above the default altitude limit, you are required to

accept the prompted disclaimer to enable the new altitude limit. If a new

altitude limit is set, you further understand and agree that data including

but not limited to flight telemetry data and altitude limit changes could

be uploaded to and maintained on a DJI-designated server.

This content is subject to change.
Download the latest version from

www.dji.com/support

MAVIC is a trademark of DJI.