Product care – DJI Mavic Pro User Manual
Page 16

17
EN
4. Be sure to update the remote controller’s firmware to the latest version
after you update the aircraft’s firmware.
5. The remote controller may become unlinked from the aircraft after
updating. Re-link the remote controller and aircraft.
6. Be sure to check all connections and remove the propellers from the
motors before performing the firmware update.
Internal Storage Device
1. The aircraft contains an internal storage device that may store data
and operations records (including still and motion imagery data from
one or more sensors in the aircraft). Still and motion imagery data may
be automatically generated from the one or more sensors when you
operate the aircraft.
2. Due to the potentially automatic generation of imagery data by the
aircraft during operation, DO NOT operate the aircraft in areas where
people may reasonably expect privacy.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rule:
1. Small parts, such as cables and straps, are dangerous if swallowed.
Keep all parts out of reach of children and animals.
1. Store the Intelligent Flight Battery and remote controller in a cool, dry
place away from direct sunlight to ensure the built-in LiPo battery does
NOT overheat. Recommended storage temperature: between 71° and
82° F (22° and 28° C) for storage periods of more than three months.
Never store in environments outside the temperature range of -4° to
113° F (-20° to 45° C).
2. DO NOT allow the camera to come into contact with, or become
immersed in, water or other liquids. If it gets wet, wipe dry with a soft,
absorbent cloth. Turning on an aircraft that has fallen into water may
cause permanent component damage. DO NOT use substances
containing alcohol, benzene, thinners or other flammable substances
to clean or maintain the camera. DO NOT store the camera in humid
or dusty areas.