DJI Mavic Pro User Manual
Page 14
15
EN
Propellers
1. DO NOT use aged, chipped, or broken propellers.
2. Always power off the aircraft before touching the propellers.
3. Be aware of the sharp edges of the propellers when mounting
or removing the propellers. Wear gloves or take other protective
measures when touching the propellers.
4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers,
etc.) to remove or install the propellers.
5. Ensure the propellers are securely mounted to prevent them from
falling off the motors.
6. DO NOT turn on the motors when propellers are mounted and there
are other people or animals in the immediate vicinity.
Motors
1. Ensure the motors are securely mounted and rotating smoothly.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands or body come in contact with the
motors after flight as they may be hot.
To avoid possible serious injury and property damage, observe the
following rules:
1. DO NOT block any of the ventilation holes on the motors.
2. DO NOT block any of the ventilation holes on the body of the aircraft.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC
(Combination Stick Command) to stop the motors immediately.
Electronic Speed Controllers
1. Ensure the ESCs sound a normal tune when powered on.
App
1. Be sure to fully charge your mobile device before launching the app.
2. If you are using a phone as your mobile display device, be sure to
continue flying safely when the phone receives an incoming call. DO
NOT accept phone calls during flight.
3. Read all prompted safety tips, warning messages, and disclaimers
carefully. Be familiar with the related regulations in your area. You are