DJI Mavic Pro User Manual
Page 20

21
EN
3. Tall buildings may adversely affect the Failsafe function. Please adjust
the aircraft location, altitude and speed while returning home to avoid
obstacles.
4. Make sure to always fly the aircraft within the transmission range of the
remote controller.
5. Only use the Failsafe and Return-to-Home functions in case of
emergency, as they may be affected by the weather, the environment,
or any nearby magnetic fields.
6. The aircraft cannot avoid obstacles during the Failsafe RTH when
lighting condition is not ideal; therefore it is important to set an
appropriate Failsafe altitude before each flight.
7. When flying indoors, the aircraft cannot perform precision hovering when
flying above the surfaces that do not have a clear pattern. Refer to the
“Vision Positioning System” section for complete indoor flying criteria.
Low Battery
1. When the Critical Battery Level Warning activates and the aircraft is
descending automatically, you may push the throttle up to maintain the
aircraft's altitude and navigate it to a more appropriate location for landing.
2. When battery warnings are triggered, promptly bring the aircraft back
to the Home Point or land to avoid losing power during flight and
causing damage to the aircraft, property, animals, and people.
Vision Positioning System
1. The Vision Positioning System cannot work properly over surfaces that
do NOT have pattern variations. The effective altitude for the Vision
Positioning System to function correctly is less than 13 meters above
ground level (AGL).
2. The Vision Positioning System may NOT function properly when the
aircraft is flying over water.
3. Keep your pets away from the aircraft when the Vision Positioning
System is activated, as the sonar sensors emit a high frequency sound
that is only audible to some pets.
4. Note that the Vision Positioning System may NOT function properly
when the aircraft is flying too fast or too low.
5. Operate the aircraft cautiously when in any of the following situations:
a. Flying over monochrome surfaces (e.g., pure black, pure white,
pure red, pure green).