1 selecting a module, Selecting a module -11, Module selection screen field descriptions – Enterasys Networks 6H2xx User Manual
Page 53

Module Selection Screen
Accessing Local Management
3-11
Field Descriptions
for a functional description of each screen field.
3.4.1
Selecting a Module
To select an individual module to perform Local Management functions, proceed as follows:
1. Use the arrow keys to highlight the desired module number in the Module # field.
2. Press ENTER, the applicable Module Menu screen displays. Proceed to
Table 3-2
Module Selection Screen Field Descriptions
Use this field…
To…
Module #
(Selectable)
Display the slot in which the module is installed. The module number
enclosed in angle brackets (< >) indicates the module to which the
management terminal or Telnet session is currently connected.
Module Type
(Read-Only)
Display the type of interface module that is installed in each slot.
Serial #
(Read-Only)
Display the serial number of the module. The serial number of the
device is necessary when calling Enterasys Networks concerning the
module.
Hardware Revision
(Read-only)
Display the hardware version of the module.