Enterasys Networks 6H2xx - Manual (Page 195)

Link Aggregation Screen (802.3ad Main Menu Screen)
Port Configuration Menu Screens 6-31
Figure 6-9 shows the four columns of information: The Port Instance; the Aggregator that the Port
is attached to; the operational key of the Port, and the state of the port’s MUX state machine.
Viewing and Editing 802.3ad Port Parameters
To view the 802.3ad related port parameters of any port displayed on the screen, proceed as
follows:
1. Use the arrow keys to highlight the port number of interest under the Port field.
2. Press ENTER. The 802.3ad Port Details screen described in Section 6.8.1.1 is displayed. Once
in this screen, the parameters of any selected 802.3ad port can be edited and saved.
6.8.1.1 802.3ad Port Details Screen
When to Use
To view and configure all the port-related LACP parameters of any port instance shown in the
802.3ad Port screen described back in
Section 6.8.1 .
How to Access
Use the arrow keys to highlight the line with the port of interest to display the details about that
port and press ENTER. The 802.3ad Port Details screen,
Figure 6-10 , is displayed, showing the
details of the port parameters (in this example for Port Instance 2) that can be modified.