Enterasys Networks 6H2xx - Manual (Page 202)

Link Aggregation Screen (802.3ad Main Menu Screen)
6-38 Port Configuration Menu Screens
Table 6-10 802.3ad Port Statistics Screen Field Descriptions
Use this field… To…
Port Instance
(Read-Only) See a unique number used to identify this port. This corresponds
to the port numbering scheme seen in other screens.
LACPDUsRx
(Read-Only) See the number of valid Marker PDUs that this Aggregation Port
can receive.
IllegalRx
(Read-Only) See the number of received frames carrying the Slow Protocol’s
Ethernet Type value (34B.4), and also contain a badly formed
PDU or a value of Protocol Subtype (43B.4) that is illegal.
MarkerPDUsRx
(Read-Only) See the number of valid Marker Response PDUs that this
Aggregation Port can receive.
LACPDUsTx
(Read-Only) See the number of LAC PDUs that this Aggregation Port can
transmit.
MarkerResponsePDUsRx
(Read-Only) See the number of Marker Response PDUs that this Aggregation
Port can transmit.
MarkerPDUsTx
(Read-Only) See the number of Marker PDUs that this Aggregation Port can
transmit.
UnknownRx
(Read-Only) See the number of Unknown frames that can be received that
either
• carry the Slow Protocols Ethernet Type value but contain an
unknown PDU, or
• are addressed to the Slow Protocols group MAC Address but
do not carry the Slow Protocols Ethernet Type.
This is a 32-bit counter of the number of Unknown frames
received, so the value can range from 0 to 2^32-1 (or 0 to
4,294,967,296).
MarkerResponsePDUsTx
(Read-Only) See the number of Marker Response PDUs that this Aggregation
Port can transmit.
RxState
(Read-Only) See the state of the Receive state machine for this port.