Snmp traps configuration screen, Snmp traps configuration screen field descriptions, Screen example – Enterasys Networks 6H2xx User Manual
Page 115: Field descriptions
SNMP Traps Configuration Screen
Chassis Menu Screens
4-15
Screen Example
Figure 4-5
SNMP Traps Configuration Screen
Field Descriptions
for a functional description of each screen field.
Table 4-5
SNMP Traps Configuration Screen Field Descriptions
Use this field…
To…
Trap Destination
(Modifiable)
Set the IP address of the workstation to receive trap alarms. Up to eight
different destinations can be defined.
Trap Community
Name
(Modifiable)
Enter the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Enable Traps
(Toggle)
Enable transmissions of the trap to the network management station
with the associated IP address. This field toggles between YES
and NO.
4046-36
Trap Community Name
public
public
public
public
public
public
public
public
EXIT
RETURN
SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]