Magnum Energy Series Stacking Cable Kit (ME-SSI) - Manual (Page 17)

©
2010 Magnum Energy, Inc.
Installation
12
Single In/Single Out (60 Amps) – Using both inputs (HOT 1
and HOT 2) for the input and output provides up to 60 amps AC
pass-thru (30 amps each line). The HOT 1 line passes through
the unit and also shares power with the charger. The HOT 2 line
passes through the unit without sharing power with the charger.
Use this confi guration if the output from your AC source provides
more than 30 amps. See Figures 9 and 10 below.
120V
120V
240V 240V
120V
120V
AC
LOADS
(120 /240 )
NEU
L1
L2
GND
AC
SOURCE
( 120 / 240)
NEU
L1
L2
GND
HOT 1 IN HOT 1 OUT
HOT 2 IN
NEUT IN NEUT OUT
MS4024 (L1)
HOT 2 OUT
GND
HOT 1 IN HOT 1 OUT
HOT 2 IN
NEUT IN NEUT OUT
HOT 2 OUT
GND
MS4024 (L2)
AC
SOURCE
( 120 only )
NEU
HOT
GND
120V
HOT 1 IN HOT 1 OUT
HOT 2 IN
NEUT IN NEUT OUT
MS4024 (L1)
HOT 2 OUT
GND
HOT 1 IN HOT 1 OUT
HOT 2 IN
NEUT IN NEUT OUT
HOT 2 OUT
GND
MS4024 (L2)
AC
LOADS
( 120 / 240)
NEU
L1
L2
GND
240V
(Invert only)
120V
120V
Info: The dashed lines between the NEUT IN and NEUT
OUT in Figures 7 through 10 represent the RD and MS-
AE Series models. Those models have no internal relay
between the NEUT IN and NEUT OUT, as they are tied
together.
Info: Refer to the MS4024 Owner’s Manual for
information on how to connect the AC terminal.
Figure 9, Single In/Out (60A with 120/240VAC source)
Figure 10, Single In/Out (60A w/ 120VAC source only)