Logitek Electronic Systems Artisan - Manual (Page 34)

Logitek
5
Operation
MTK-EFFECTS (EQ and Dynamics Module) – Screen
The Effects Module has an LCD color screen which displays the parameters being edited for the
current fader or mix bus. Shown below is an example of the Effects Module changing Fader 1.
Figure 16 - MTK-EFFECTS Screen
The following information is displayed.
Current Source
The fader or bus being edited is displayed in large green text on the top line of the screen.
EQ Parameters
Parameters for the equalizer are shown on the left half of the screen. See the MTK-FADER module
(page 26) for descriptions and ranges of each parameter.
Dynamics Parameters
Parameters for the dynamics processor are shown on the right half of the screen. See the MTK-
FADER
module (page 27) for descriptions and ranges of each parameter.
” TIP: Limiter parameters are shown on the MTK-EFFECTS screen, however there are no
direct controls on this module. Limiter adjustments can be made via the MTK-
FADER menu.
Fader Label
The Device Name for the fader being edited is show on the bottom of the screen as one line of 16
characters.
Logitek Artisan Reference Manual 32