Lanner FW-7573 - Manual (Page 12)

7
Hardware Setup
Chapter 2
Network Application Platforms
. 2.5” HDD installation Installing the Front Ethernet Module
To install the front Ethernet module, take off the front 1.
bezel first by loosening the thumbscrews on the front
of LAN module.
Insert the Ethernet module into the front expansion
2.
slot. You should hear a click when the module connects
to the system’s mainboard.
Secure the Ethernet module by fastening the screws
3.
on the module (please use a screw driver).
Note: Please note the orientation of the HDD tray placement
when you take out the try. It is recommended that the HDD is
installed in this orientation on the system.
Note: Please note the original package only includes one SATA
cable (data), You need to order another cable (SATA data
+power) for additional SATA HDD installation..
SATA powerconnector
SATA data connector