Lanner FW-7565 - Manual (Page 38)

33
Bios Settings
Chapter 4
Network Application Platforms
drivers loaded on the system. Set this value to allow the
system to select the Emulation type for a USB drive.
Option Description
Auto Set this value to allow the system to automatically
detect a USB drive emulation type.
Floppy Set this value to allow the system to select floppy
emulation type.
Hard Disk
Drive Set this value to allow the system to select hard
disk drive emulation type.
Lan Bypass Control
In this screen, you can configure the Lan Bypass
functionality.
Lan Bypass for Port 1 and Port 2 (or Port3 and Port 4)
You can activate or deactivate the Lan Bypass ports. For
the description of the physical ports that are capable of
the LAN Bypass function, refer to the Front Panel Feature in
Chapter 1 Introduction.
Lan Bypass for Port1 and Port 2 when power off
You can enable or disable the automatic activation of