Lanner FW-7565 - Manual (Page 34)

29
Bios Settings
Chapter 4
Network Application Platforms
Remote Access Settings
You can use this screen to select options for the Remote
Access Configuration. Use the up and down keys
to select an item. Use the and keys to
change the value of the selected option. The settings are
described on the following pages. The screen is shown at
right.
Remote Access
You can disable or enable the BIOS remote access feature
here.
Option Description
Disabled Set this value to prevent the BIOS from using
Remote Access.
Serial Set the value for this option to Serial to allow
the system to use the remote access feature.
The remote access feature requires a dedicated
serial port connection.