Chapter 3, Motherboard information – Lanner FW-7565 User Manual
Page 18
13
Motherboard Information
Chapter 3
Network Application Platforms
M12
USB 3 and 4 Connectors(J5) : It is for connecting USB
module cables. Two external USB ports and two on-
board USB pin headers are provided by the ICH8M’s
integrated USB host controller which complies to
both Universal Host Controller Interface (UHCI) and
Enhanced Host Controller Interface (EHCI) standards
The later standard enables USB2.0 and support up to
480 Mbps connection speed.
M13
Serial Interface Connectors(J6): It is for connecting
the RS-232 serial port module cable. The RS-232
communication port is provided by the Winbond
83627THG which is an LPC-interfaced super I/O
device.
M14
Keyboard and Mouse Connector (J4): It is for
connectiNg the PS/2 keyboard and mouse interface
cable.
M15
SIM Card Tray(CN3): It is for connecting SIM card for
mobile Internet connection.
M16
Mini-PCIe Socket(CN4): It is for connecting WiFi
module to serve Wireless LAN connections or
connecting Wireless 3G module for mobile Internet
connections.
M9
Clear CMOS jumper (JP1): It is for clearing the CMOS
memory and system setup parameters by erasing
the data stored in the CMOS RAM such as the system
passwords.
M10
CompactFlash Connector (CN1): It is for connecting
a Compact Flash card to be served as your system's
storage. The socket is CF type II and can fit into both
bype I and type II cards.
M11
SATA 1 and 2 Connectors(J2, J3): It is for connecting a
2.5’’ or 3.5” SATA harddisk to be served as your system’s
storage. The ICH8M provides hardware support for
Advanced Host Controller Interface (AHCI) which is
a programming interface for SATA host controllers.
AHCI provides advanced performance and usability
enhancements with SATA such as Hot-Plug, no
master/savle designation for SATA devices and native
command queuing.
Note: To configure your Hard disk using the
integrated RAID functionality, the Intel® Matrix
Storage Manager software has to be installed on
your Operating System. Visit the Intel support
page at
or more
information and download links.
The Intel controller hubs are also supported by
Linux.Beginning with Linux kernel version 2.6.27,
the mdadm utility 3.0 supports RAID 0, RAID 1,
RAID 10, and RAID 5.
To use the RAID features in dmraid and mdadm,
you will need to set up the RAID volume using the
Intel® Matrix Storage Manager option ROM (click
CTRL + I when prompted during boot to enter the
option ROM user interface).
1
2
3
Pin No.
Function
1-2 (Default)
Normal
2-3
Clear CMOS
PIN NO.
10
8
6
4
2
Function USB_VCC
Key
USBD1- USBD1+
GND
Function
GND USBD0+ USBD0-
KEY
USB_VCC
PIN NO.
9
7
5
3
1
9 7 5 3 1
10 8 6 4 2
Pin No.
Function
1
Ground
2
Ground
3
TX+
4
TX-
5
Ground
6
RX-
7
RX+
1
2
3
4
5
6
7
PIN NO.
10
8
6
4
2
Function Key
Ring
Indicator
Clear to
Send
Request to
Send
Data
Set
Ready
Function GND
Data Termi-
nal Ready
Transmit-
ted Data
Received
Data
Data Car-
rier Detect
PIN NO.
9
7
5
3
1
9 7 5 3 1
10 8 6 4 2
Pin No.
Function
VCC
1
MSDATA
3
KBDATA
5
GND
7
Pin No.
Function
2
MSCLK
4
KEY
6
KEY
8
KBCLK
1
3
5
7
2
4
6
8