Lanner LVC-5570 - Manual (Page 30)

30
Hardware Setup
Chapter 5
Embedded and Industrial Computing
Note: To remove the SIM card, slide the card
reader outward to unlock it.
External SIM Card Installation
Take out the SIM Card tray by pushing the ejector with 1.
a pointed object.
Place the SIM card on the SIM card tray. Notice the
2.
angled corner to align the SIM card properly.
Wireless Module Installation
Align the wireless module’s cutout with the Mini-PCIe 1.
slot notch.
Insert the wireless module into the connector
2.
diagonally.
Hold down the other end of the wireless module and
3.
tighten it with the screws.
3G SIM Card Installation
Unlock the SIM card reader first by sliding it outward. 1.
Flip the SIM card reader diagonally. 2.
Align the angled corner of the SIM card pointing 3.
toward SIM card reader. Make sure the ICs will be in
contact with the SIM card reader.
Insert the
4. SIM card into the reader and close the tray.
You should feel a click when the SIM card is locked
securely in the SIM card reader.
Lock
Unlock
2
3
ejector
(SIM2 SIM1)
2
3
4