Lanner LVC-2000 - Manual (Page 6)

6
Introduction
Chapter 1
Embedded and Industrial Computing
Package Contents
Your package contains the following items:
LVC-2000 Fanless Embedded System with rubber
stands:
• Terminal Block Connectors:
-Power connector 3 pin x1 (P/N:04AW20031E001)
-MIO Connector 20 pin x1 (P/N: 04AW20203Z101)
• HDD Screws x 4 (P/N: 070W102400602)
• Mini-PCIe Screws x 4 (P/N: 070W101000401)
Compliance
Low Temperature:
MIL-STD-810G, Method 502.5,
Procedure I (Storage)
MIL-STD-810G, Method 502.5,
Procedure II (Operational)
Temperature Shock:
MIL-STD-810G, Method 503.5,
Procedure I-C
General Vibration (Operat-
ing):
MIL-STD-810G, Method 514.6,
Procedure I, Category4, Figure
514.6C-1 (Common Carrier,
US Highway Truck Vibration
Exposure)
General Vibration (Non-
operating):
MIL-STD-810G, Method 514.6,
Procedure I, Category 24, Figure
514.6E-1 (General Minimum
Integrity)
Shock (Operating):
MIL-STD-810G, Method 516.6,
Procedure I (Functional Test for
Ground Equipment)
Shock (Non-operating):
MIL-STD-810G, Method 516.6,
Procedure V (Crash Hazard Shock
Test for Ground Equipment)
Transit Drop:
MIL-STD-810G, Method 516.6,
Procedure IV (Transit Drop)
Operating
Temperature
Range
Extended
With Selected Industrial Com-
ponents
-20~60°C/-4~140°F