Lanner LVC-2000 - Manual (Page 5)

5
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
Thank you for choosing the LVC-2000.
The LVC-2000 is a compact in-vehicle computing system
designed with support for wall mount 1 and it has a
vibration kit built in for eliminating shock and vibration,
ideal for deployment and installation on moving
transportation vehicles.
The system is equipped with the newest 22nm process
Intel® Atom™ processor E3845 family (formerly
codenamed Bay Trail). This system-on-chip (SoC)
incorporates up to four cores and supports system
memory DDR3L-1066/1333 SO-DIMM maximum up to 8
GB. This small form factor is capable of operating under
wide temperatures from -20°C to +60°C in fanless
operation, which allows the system to operate in rugged
environments. Moreover, it comes with multiple display
outputs: HDMI and VGA. With integrated Intel® Gen
HD graphics, visual capabilities are enhanced, including
faster media processing, full HD over HDMI, spectacular
HD playback, etc.
The system encompasses a wide variety of communication
ports to facilitate every possible in-vehicle applications:
• One Ethernet port provided by Intel i210IT Ethernet
controller .
• Two additional digital input pins from the Multiple
(MIO) I/O port can be used for system wake-up to
power on the system automatically; another two
digital output pins from the same Multiple I/O (MIO)
port can be used for control relay (current @2mA)
• Multiple I/O ports for Digital I/O and serial port
connections
• Rich I/O ports: two RS-232, 3 USB ports (one USB 3.0
type A, 2 USB 2.0 with pin headers)
• Three Mini-PCIe connectors (one supports mSATA; one
full-size with SIM card reader for 3G wireless Internet
connection; one half-size for Wi-Fi connection)
• Dual video display: HDMI+VGA output with Intel
integrated HD graphic engine
• Power ignition control mechanism with programmable
on/off/delay switch
• Wide range of DC power input from 9V to 36V, suitable
for vehicular 12V or 24V battery with Ignition control.
–Power input current protection by 15KP30A TVS
--12V DC output current with a maximum of 1A
• Battery voltage protection: Over Voltage Protection
and Under Voltage Protection
System Specifications
Dimensions (WxHxD) 210 x 52 x 144 mm
Processor
ntel Atom processor E3845
1.9GHz (Option for E3815 /
E3825 / E3826 / E2827)
System
Memory Technology
DDR3L SO-DIMM x1 ( Factory
default: 2GB module pre-
installed )
Max. Capacity Up to 8GB (user option)
Storage mSATA/SATA
Removable 2.5” SSD/HDD drive
bay x1, Mini-PCIe connector for
mSATA
Ethernet Controller Intel i210IT
Graphic Controller
Intel integrated HD graphic
engine
Audio Controller Realtek ALC886-GR
IO
LAN GbE RJ45 x1
Display
VGA, maximum resolution up to
2048x1536@60Hz
HDMI, maximum resolution up to
1920x1200@75Hz
Audio
Internal pin header for Mic-in
and Line-out
Serial I/O
1 x RS-232
1 x RS-232/422/485
GPS Ublox NEO-7N GPS receiver
G-sensor ADXL 345
MIO
4x DI ( 5V or 12V TTL selectable)
4x DO (12V TTL , Max. 100mA)
2x DO control Relay support
9~36V@max 2A each
2x DI to Ignition MCU as remote
control
1x 12VDC Out
1x Rx/Tx
USB 2.0
USB 3.0Type A x 1
USB 2.0 Pin headers x2
Power Input
3-pin terminal block (+, -, igni-
tion)
Expansion
Mini-PCIe x2 (one is full-size
with SIM card reader; the other
one is half-size)
CAN bus supports J1939 & J1708
Power Input
+9~36VDC input range, with
ignition delay on/off control
OS Support
Windows7/ 7 Embedded /8
embedded OS Image:
WES7 (64bit & 32bit) / W7
FES (64bit & 32bit) / Windows
8(32bit); Linux kernel 2.6.X or
later
Certifications CE, FCC Class A, E13, RoHS