KACO Powador-gridsave - Manual (Page 10)

Page 10 Battery unit extension - Panasonic / Sanyo for Powador-gridsave
Description
3.2.2 Battery
WARNING
Destruction of the batteries when using batteries from other
manufacturers!
The Battery Management System (BMS) should only be used with the
battery type BJ-DCB102U and is not permitted to be mixed with
equipment from other manufacturers in any circumstances.
1 2 3a 3b 4 5
Table 2: Battery module
Key
1 Connection terminal for battery - minus pole
2 Service plug with integrated DC breaker
3a
3b
Communication connection to the
- upper battery module / Battery Management System (BMS)
- lower battery module or termination (terminating resistor)
4 Status LED
5 Connection terminal for battery - plus pole
NOTE
The lithium ion battery is used as energy storage for the solar power
generated. An integrated controller monitors the charge status, elec-
tricity and temperature, and deactivates the battery module in the
event of an fault.