KACO blueplanet 1502xi - Manual (Page 16)

Page 18 blueplanet Operating and Installation Instructions 1502x - 2502x
About This Documentation
1 About This Documenta-
tion
The following notes guide you through all of the documenta-
tion. Additional documents are applicable in conjunction with
these operating and installation instructions.
NOTICE
Read the manual!
We assume no liability for any damage caused by failure to
observe these instructions.
Other applicable documents
When installing the inverters, be sure to observe all assembly and
installation instructions for components and other parts of the
installation. These instructions are delivered together with the
respective components and additional parts of the installation.
Please refer to the installation manual and any instructions
which may have been included with the inverter for information
regarding installation of the inverter.
1.1 Retention of documents
Please pass these operating and installation instructions on
to the installation operator. The installation operator retains
the documents. The instructions must be available whenever
they are needed.
1.2 Symbols used in this
document
When installing the inverter, observe the safety instructions
included in these installation instructions.
! DANGER
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
!
WARNING
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious
injury.
!
CAUTION
CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury.
NOTICE
Failure to observe a warning indicated in this manner may
lead to damage to property.
NOTE
Useful information and notes.
ACTION
This symbol indicates that a certain action is required.
IMPORTANT
Failure to observe this information may result in reduced
convenience or impaired functionality.
Electrical voltage!
Risk of fi re or explosion!
Risk of burns!
Read the manual!
Switch off the power!
1.3 Name plate
The name plate showing the exact designation of the unit is
located on the left side of the housing.