KACO Powador-piccoLOG - Manual (Page 27)

Operating manual Powador-piccoLOG_EN Page 27
Environmental Protection and Waste Disposal
8.2 Acknowledging errors
There are two ways in which to acknowledge errors.
Firstly:
" Confirm error by briefly pressing the "SCAN" or "COM" buttons.
» The audio signal is now deactivated until the next error occurs, the LED
signals will remain active for longer.
NOTE
Inform your technician so that the error can be fixed.
Secondly:
" Fix error.
» An audio signal sounds. The error is acknowledged.
» Afterwards a test is carried out that queries all possible errors, in order to
report any connected errors that remain.
NOTE
In order to prevent any recurring alarm notifications,
the error can be acknowledged in the above manner in the interim
between recognising and repairing the error.
9 Environmental Protection and Waste
Disposal
Old and out of use devices are to be disposed of according to the national and
regional regulations for environmental protection and recovery of raw materials.
Electronic components must not be disposed of with domestic waste.