KACO Powador-piccoLOG - Manual (Page 16)

Installation and Start-up
Page 16 Operating manual Powador-piccoLOG_EN
5.6 Power connection
" Connect the accompanying power supply to the power socket (see 5.3
“Interface overview").
" Connect the power supply to the mains.
" Attach protective cover.
5.7 Configuring internet connection
5.7.1 Automatic configuration in networks with DHCP
NOTE
The router automatically assigns client's IP addresses when DHCP is
activated on the network.
Automatic configuration
" Connect the device to the network via the Ethernet port using an Ethernet
cable.
» The device is allocated an IP address and is now configured.
» The data logger does not have a web server and is not available via HTTP.
5.7.2 Manual configuration to the network without DHCP
Manual configuration
" Connect the device to the network via the Ethernet port using an Ethernet
cable.
" Enter the network settings (IP address etc.) into the software.