KACO Powador-piccoLOG - Manual (Page 19)

Technical Data
Operating manual Powador-piccoLOG_EN Page 19
6 Technical Data
General Information
Power supply DC 24 V
Power consumption 1.7 W (typical)
Bus connection integrated (cannot be switched off)
Network Ethernet connection (10/100 Mbit)
Communication 1 x RS485/RS422
2 x RS232
2 x pulse input according to DIN 43864 (ISO)
4 x digital input for ripple control receiver
Frame size (W x H x D) in mm 152 x 107 x 37
Protection class IP21
Weight 203 g
Ambient conditions
Operating temperature 0 to 55 °C
Storage temperature -20 to 65 °C
Cables and wires
Cable types
Bus cable
RS485/422, twisted and shielded
Li2YCYv (TP) 2 x 2 x 0.5 mm2
1 )
Ethernet cable Cat 5e / Cat 6 / Cat 7
RS232 J-Y(ST)Y 2 x 2 x 0.6 mm²
Power control Cat 5e / Cat 6 / Cat 7
Maximum cable length permitted
Bus cable
1200 m 2)3)
Ethernet cable 100 m 3)
1) We recommend the use of UNITRONIC® Li2YCYv (TP) cables, produced by
"Lapp Kabel" or equivalent. This cable is suitable for installation directly into
the earth.
2) The use of repeaters is required for longer cables.
3) Multiple cables of this length will require a hub.