KACO Powador-piccoLOG - Manual (Page 22)

Operation
Page 22 Operating manual Powador-piccoLOG_EN
7.4 Factory settings
Audio alarm signal active
No power signal from RSE 70 % of P
Nenn
Unexpected power signal from RSE 70 % of P
Nenn
Power reduction at level 0 100 % of P
Nenn
Power reduction at level 1 60 % of P
Nenn
Power reduction at level 2 30 % of P
Nenn
Power reduction at level 3 0 % of P
Nenn
DHCP active
7.5 PC software mode
NOTE
As soon as the device is connected to the PC via the accompanying
USB cable, the USB mode is automatically activated.
7.5.1 Firmware update
A Firmware update can be carried out using the Powador-piccoLOG Device
Manager software.
During a Firmware update all five LEDs flash consecutively. Upon completion of
the Firmware update the device will restart and re-connect with the software.