Ion Science Hydrosteel 7000 - Manual (Page 5)

Hydrosteel 7000 MANUAL Ion Science Ltd
Page 5 of 43
Unrivalled Detection. www.ionscience.com
Statements
Responsibility for Use
Hydrosteel 7000 flux monitor for permanent installation provides flux readings that are subject to
interpretation. Ion Science Ltd can accept no responsibility for the incorrect use that may causes harm or
damage to persons or property.
Inadequate performance of the gas detection equipment described in this manual may not necessarily be
self-evident and consequently equipment must be regularly inspected and maintained. Ion Science
recommends that personnel responsible for equipment use institute a regime of regular checks to ensure it
performs within calibration limits, and that a record be maintained which logs calibration check data. The
equipment should be used in accordance with this manual, and in compliance with local safety standards.
Warnings
1.
Please read and understand this User Manual fully before installing operating or servicing the
Hydrosteel.
2. Ensure you are in a SAFE area before carrying out any type of maintenance on the Hydrosteel 7000
Instrument.
3. Substitution of components may impair intrinsic safety and result in unsafe conditions.
4. For safety reasons, the Hydrosteel must only be operated and serviced by qualified personnel.
5. Refer to the certificate for clarification of any aspects of intrinsic safety or contact Ion Science Ltd or
your local Ion Science Ltd representative.
Quality Assurance
Hydrosteel 7000 has been manufactured in compliance with ISO9001:2008 and BSEN 13980:2002, which
ensures that the equipment supplied to our customers, has been designed and assembled reproducibly, and
from traceable components.
Disposal
Dispose of Hydrosteel 7000, its components in accordance with all local and national safety and
environmental requirements. This includes the European WEEE (Waste Electrical and Electronic Equipment)
directive. Ion Science Ltd offers a take back service. Please contact us for more information.
Calibration Facility
Ion Science Ltd offer a calibration service including the issue of certification using equipment which are
themselves traceable to UK national standards.
Legal Notice
Whilst every attempt is made to ensure the accuracy of the information contained in this manual, Ion Science
accepts no liability for errors or omissions, or any consequences deriving from the use of information
contained herein. It is provided "as is" and without any representation, term, condition or warranty of any
kind, either express or implied. To the extent permitted by law, Ion Science shall not be liable to any person
or entity for any loss or damage which may arise from the use of this manual. We reserve the right at any
time and without any notice to remove, amend or vary any of the content which appears herein.
Packing list