Ion Science Hydrosteel 7000 - Manual (Page 27)

Hydrosteel 7000 MANUAL Ion Science Ltd
Page 27 of 43
Unrivalled Detection. www.ionscience.com
Commissioning
18. Fit the pneumatic connectors on to the nylon tubes.
19. Snap the pneumatic connectors into the pneumatic module.
20. The Han frame ((1/JFIB-02) hinges to allow fitting of the insert modules from the rear.
21. Note frame and modules have keyways to allow only one orientation of fitting. The A
 and B  arrows
point to the top of the pneumatic module. With the pneumatic module on the side marked with capital
“B”
22. Fit the frame into the Han connector housing.
Note orientation
Hing
e