Invotel SX8600 - Manual (Page 5)

v
Specifications:
File Formats supports any sound file format such as Windows .wav, MP3,
WMA, etc.
Frequency response 20Hz to 20 KHz.
Sampling rate 8-bit/16-bit uncompressed PCM @ 8, 11, 12, 16, 22, 24, 32, 44
& 48 KHz
Distortion less than 0.1% THD
Audio Quality supports better than CD Quality at 188 KB/s
Special effects: supports Windows Media Files and SRS WOW Effects
Memory Capacity 1 to 34 minutes (17 minutes @ full 188 KB/s sample rate).
Memory Type Multi-level Flash, 100 years retention time at no power, 100K re-
recordable
Playback auto-repeat
Message loading Email load, automatic via playing the email; CD load
automatic
Power supply 110VAC 60 Hz. To 12VAC 600ma
Audio output 1000 mili watts, Mono RCA , 2V p-p @ 8Ω 4V p-p @ 600Ω, 8V p-p
@1200Ω
Size 5.5” x 4” x 1.5” (L x W x H) Color Metallic Blue
Weight 1.50 pounds (2.00 pounds with power supply)
Auto Attendant operations: refer to page 1 for connections
make sure switch is in A or C (not B)
To Hear the current greetings:
To Hear the current Transfer message:
To Record a new Greeting via Microphone: (this will erase the current greeting)
To Record a new Transfer message via microphone: (this will erase the current one)
P5
Package Content:
SX8600 Digital Player/Recorder/adapter unit
Power adapter 110v AC to 12v AC 600 ma
3.5mm male to 3.5mm male audio cord 6’
2 Rj-14 phone cords
User’s Manual
MX9008 or MX9017 Flash Card
Microphone/Headset
Warranty
This product is warranted against defects for a period of Five (5) year from the date of original
invoice. We will repair/replace the Product with no charge for parts or labor within this time. To
obtain warranty service the Product needs to be returned fright prepaid by the customer with a
copy of original invoice. This warranty does not apply if in the sole opinion of Innovative
Telecommunication Technology LLC, the product has been tampered with or damaged by
lightning or any other acts of nature, misuse, neglect or unauthorized service.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR OTHERWISE,INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OR MERCHANTIBILITES OR FITNESS FOR A SPECIAL PURPOSE.
IN NO EVENT SHALL INNOVATIVE TELECOMMUNICATION TECHNOLOGY LLC BE LIABLE
FOR LOSS OF PROFITS OR BENEFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR
OTHERWISE ARRISING FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE.
• set the bank switch to bank 1 for day greeting or bank 2 for night greeting
• remove the Microphone (usually RED color connector) from MIC IN jack
• remove the recording cord from the Audio IN jack
• connect the head set to Audio Out Jack or make a call and place yourself on Hold,
adjust the volume level if needed so you can hear the on hold stuff.
• Press and hold the REC button for about 5 seconds till the Green status light turns
OFF, now release the REC button and you will hear the current greeting.
• set the bank switch to bank 2, remove & make the connections as above.
• Press and hold the REC button for about 5 seconds till the Green status light turns
OFF, Hold it pressed 5 more seconds till the Green turns back ON, now release the
REC button and you will hear the current transfer message.
• set the bank switch to bank 1 for day greeting or bank 2 for night greeting
• connect the Microphone to MIC IN jack (usually RED color connector)
you may optionally connect the recording cord to Audio IN jack (if you want to
record a back ground music)
• connect the head set to Audio Out Jack or make a call and place yourself on Hold,
adjust the volume level if needed so you can hear the on hold stuff
• Press and hold the REC button for about 5 seconds till the green status light turns
OFF, now release the REC button , Green and RED begin turning ON/OFF
continuously to indicate it is ready to start recording. [to abort remove Mic]
• Press the REC button to start recording your new greeting and begin speaking into
the microphone (you have up to 30 seconds), press REC again when you are
finished, it will re-play it for you, while re-playing you may press REC again to re-
record, when you are done let it play the final recording for you and do not press
REC and it will automatically exit to normal ON hold playback. Remove Mic.
• set the bank switch to bank 2, make the connections as above.
• Press and hold the REC button for about 5 seconds till the Green light turns OFF,
Hold it pressed 5 more seconds, the Green turns back ON, now release the REC
button , Green and RED begin turning ON/OFF continuously to indicate it is ready to
start recording. [to abort remove Mic]
• Press the REC button to start recording your new transfer message and begin
speaking into the microphone (you have up to 4 seconds), press REC again when
you are finished, it will re-play it for you, while re-playing you may press REC again
to re-record, when you are done let it play the final recording for you and do not
press REC and it will automatically exit to normal ON hold playback. Remove Mic.
•
P12
See pages P9, P10, P11 to Record your “on Hold” stuff