Yaskawa LonWorks Option Card CM048 - Manual (Page 13)

Installation 1-7
‹ Connect L
ON
W
ORKS
Option to the Drive.
„ Determine the drive family on which the L ON W ORKS Option is installed. Connect the L ON W ORKS Option communication cable to the
drive as shown below. Also set the termination switch to ON.
Figure 1.3 – L ON W ORKS Option E7, P7 and F7 Drive Connections
Figure 1.4 – L ON W ORKS Option E7L and E7B Connections
Figure 1.5 – L ON W ORKS Option G7 Drive Connections