Yaskawa GPD506/P5 with Apogee FLN Option - Manual (Page 12)

11
Point #
Database
Descriptor
Point
Type
Units
(SI)
Slope
Interce
pt
On Text Off Text Default
{39} FREQ LOW LM LAO PCT 1.0 0 -- -- 0
{40} MULTI OUT 1 LDI -- -- -- ON OFF OFF
{41} MULTI OUT 2 LDI -- -- -- ON OFF OFF
{42} TERM S1 MON LDI -- -- - CLOSED OPEN OPEN
{43} TERM S2 MON LDI -- -- - CLOSED OPEN OPEN
{44} TERM S3 MON LDI -- -- - CLOSED OPEN OPEN
{45} TERM S4 MON LDI -- -- - CLOSED OPEN OPEN
{46} TERM S5 MON LDI -- -- - CLOSED OPEN OPEN
{47} TERM S6 MON LDI -- -- - CLOSED OPEN OPEN
{55} OP MODE SEL LAO -- 1.0 0 -- -- 6
{60} FREQ REF LAO HZ 0.1 0 -- -- 0
{61} FREQ REF MON LAI HZ 0.1 0 -- -- 0
{62} PID FEEDBACK LAI HZ 0.1 0 -- -- 0
{63} PI GAIN LAO -- 0.1 0 -- -- 1.0
{64} PI TIME LAO SEC 0.1 0 -- -- 10.0
(65} PID SELECT LAO -- 1.0 0 -- -- 0
{70} RD PARAM NUM LAO -- 1.0 0 -- -- 0
{71} RD PARAM DAT LAI -- 1.0 0 -- -- 0
{72} WR PARAM NUM LAO -- 1.0 0 -- -- 0
{73} WR PARAM DAT LAO -- 1.0 0 -- -- 0
{80} S1 RUN ILOCK LDO -- 1.0 0 ENABLE DISABL ENABLE
{81} S5 AUTO RUN LDO -- 1.0 0 ENABLE DISABL ENABLE
{90} CBL LOSS FLT LDO -- 1.0 0 ENABLE DISABL DISABL
{91} CBL LOSS FRQ LAO HZ 0.1 0 -- -- 0
{92} CBL LOSS TMR LAO SEC 0.1 0 -- -- 0
{93} FAULT LDI -- -- -- FAULT NO FLT NO FLT
{94} FAULT RESET LDO -- -- -- RST ON RSTOFF RSTOFF
{96} EXTERNAL FLT LDO -- -- -- FLT ON FLTOFF FLTOFF
Notes
1. Slope is dependent on drive capacity. For drives with a rated current of 180 A or less, the slope is
0.1. For higher capacity drives, the slope is 1.0.