Yaskawa VCD 723 - Manual (Page 103)

Node 260 (Dual Port Ram) Assignments - Continued
Appendices
97 Node, Channel and Subchannel Assignments
9/15/93
601 ~ NUMO Dn-01 (MOTOR BASE SPEED) 1750 RPM
602 ~ NUMO Dn-02 (MOTOR MAXIMUM SPEED) 1750 RPM
603 ~ NUMO Dn-03 (NUMBER OF MOTOR POLES) 4 ~
604 ~ NUMO Dn-04 (MOTOR NO LOAD VOLTAGE) 170/340 VAC
605 ~ NUMO Dn-05 (MOTOR RATED PRIMARY CURRENT) AAC
606 ~ NUMO Dn-06 (RATED SLIP FREQUENCY) 1.00 HZ
607 ~ NUMO Dn-07 (EXCITATION CURRENT REFERENCE) 30.0 %
608 ~ NUMO Dn-08 (PRIMARY RESISTANCE, USED WITH OPT TRQ 2.0 %
BOARD)
609 ~ NUMO Dn-09 (LEAKAGE COEFFICIENT, USED WITH OPT TRQ 20.00 %
BOARD)
610 ~ NUMO Dn-10 (MOTOR IRON LOSS) 2.0 %
611 ~ NUMO Dn-11 (MOTOR MACHINERY LOSS) 0.5 %
612 ~ NUMO Dn-12 (SECONDARY CIRCUIT TIME CONSTANT) 100 MSEC
613 ~ NUMO Dn-13 (LEAKAGE SAT COEF, USED WITH OPT TRQ 1.20 ~
BOARD)
614 ~ NUMO Dn-14 (ROTOR HEAT GAIN) 0.00 ~
615 ~ NUMO Dn-15 (ROTOR HEAT TIME CONSTANT) 30 MIN
616 ~ NUMO Dn-16 (IRON CORE SATURATION COMP 0.5 ~
COEFFICIENT 1)
617 ~ NUMO Dn-17 (IRON CORE SATURATION COMP 0.75 ~
COEFFICIENT 2)
618 ~ NUMO Dn-18 (MOTOR OVERHEAT TEMPERATURE) 120 ◆ °C
CHAN SUB PAC INITIAL UNITS
CHAN BLOCK DESCRIPTION VALUE
TYPE
◆ -Initial value dependent on setting of Sn-02. Value shown is for Sn-02 setting of FFF hex.