Yaskawa MP2000iec - Manual (Page 43)

12 Ethernet
YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R 43
12 Ethernet
‹
Ethernet Connector Details
Connects to a personal computer or HMI device by Ethernet (100Base-TX/10Base-T).
„
Ethernet Connector Specification and Pin Array/Indicator Light
The following table provides the Ethernet connector specifications.
The following table provides Ethernet connector pin array / indicator light details.
„
Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45 connector. Yaskawa strongly recommends the use of shielded
ethernet cables.
Connector Name Number of Pins
Connector Model
Module Side Cable Side Manufacturer
Ethernet 8 RJ-45 CAT5 Socket RJ-45 CAT5 Plug Pulse Engineering
Pin Number Signal Name Description
1 TXD+ Transmitted data + side
2 TXD- Transmitted data – side
3 RXD+ Received data + side
4 – –
5 – –
6 RXD- Received data – side
7 – –
8 – –
Display Name Display Color Description
LINK Yellow
Lit: Connect
Unlit: Unconnected
100M Green
Lit: Connected at 100Mbps, or automatically negotiating
Unlit: Connected at 10Mbps
Ethernet Type Category Remarks
10Base-T Category 3 or more • When connecting to remote equipment through a hub:
Straight cable
• When connecting to remote equipment without using a hub: Cross
cable
100Base-T Category 5 or more
'VJGTPGV
.+0-
/