Yaskawa MP2000iec - Manual (Page 23)

5 Mounting
YASKAWA America, Inc. MP2300iec Hardware Manual YAI-SIA-IEC-2R 23
„
Replacing and Adding Option Modules
Preparations
1. Turn OFF the MP23 ͙͙͙ iec Power Supply
2. Remove the MP23 ͙͙͙ iec
Disconnect all cables from the MP2300Siec. Then remove the MP2300Siec from the panel or rack and place on a
workbench or other area with sufficient space.
Removing Option Modules
1. Remove the battery cover.
Pull the notch on the side of the MP23 ͙͙͙ iec towards you to remove the battery cover.
2. Remove the Option Module Cover
Insert the protruding part of the battery cover into the slot on top of the panel of the Option Module to unhook, as
shown in the diagram. Face the front of the battery cover towards you for this operation.
• Remove the front cover from the empty slot before mounting an Option Module in an empty slot.
Unhook the bottom in the same way.