Yaskawa GPD 515/G5 to F7 - Manual (Page 29)

Product Transition Guide
Appendix 2- Parameter Differences
____________________________
PL.F7.02.TransitionGuide 6/5/06
Page 29 of 40
Yaskawa Electric America, Inc
GPD515/G5 Parameters F7 Parameters
Parameter
No.
Name
(DigitalOperator
Display)
Setting or Selection
Parameter
No.
Name
(Digital Operator Display)
Remarks on
Setting or Selection
— — — C6-01 Drive Duty Selection New parameter
0: Heavy Duty
1: Normal Duty 1
2: Normal Duty 2
— — — C6-02 Carrier Frequency
Selection
New parameter function
different than old C6-02 in
GPD515/G5
0: Low noise
1: Fc = 2.0 kHz
2: Fc = 5.0 kHz
3: Fc = 8.0 kHz
4: Fc = 10.0 kHz
5: Fc = 12.5 kHz
6: Fc = 15.0 kHz
F: Program Determined by the
settings of C6-03 thru C6-05
C6-01 Carrier Frequency
Upper Limit — C6-03 Carrier Frequency
Upper Limit Changed Parameter No.
C6-02 Carrier Frequency
Lower Limit — C6-04 Carrier Frequency
Lower Limit Changed Parameter No.
C6-03 Carrier Frequency
Proportional Gain — C6-05 Carrier Frequency
Proportional Gain Changed Parameter No.
C7-01 Hunting Prevention
Selection 0:Disabled
1:Enabled n1-01 Hunting Prevention
Selection Changed Parameter No.
C7-02 Hunting Prevention
Gain — n1-02 Hunting Prevention
Gain Setting Changed Parameter No.
C8-08 AFR Gain — n2-01 Speed Feedback
Detection Control AFR
Gain Changed Parameter No.
C8-09 AFR Time Constant — n2-02 AFR Time Changed Parameter No.
— — — n2-03 Speed Feedback
Detection Control
AFR Time Constant 2 New parameter
Sets the time constant to
control the amount of change
in the speed at low speed.
— — — d1-09 Frequency Reference 9 New Parameter
— — — d1-10 Frequency Reference
10 New Parameter
— — — d1-11 Frequency Reference
11 New Parameter
— — — d1-12 Frequency Reference
12 New Parameter
— — — d1-13 Frequency Reference
13 New Parameter
— — — d1-14 Frequency Reference
14 New Parameter
— — — d1-15 Frequency Reference
15 New Parameter
— — — d1-16 Frequency Reference
16 New Parameter
D1-09 Jog Frequency
Reference d1-17 Jog Frequency
Reference Changed Parameter No.
— — — d2-03 Master Speed
Reference Lower Limit New Parameter
— — — d6-01 Magnetic Field
Weakening Level New Parameter
— — — d6-02 Magnetic Field
Frequency New Parameter