Yaskawa JVOP-180 LCD - Manual (Page 8)

8 YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
2 Product Overview
2 Product Overview
◆
About This Product
The option provides an enhanced unit user interface that can operate the Yaskawa unit from
up to 3 meters away. The option can display information in 13 languages, including English,
Japanese, and Spanish.
<1> <2>
The option is an LCD display that simplifies the task of
interfacing with the unit to perform these tasks:
• Read or modify unit parameters.
• Read and copy unit parameter settings to another Yaskawa unit.
• Operate the unit.
• Monitor unit operation status.
Note: Installing and connecting the option to a V1000 will cause the built-in LED operator on the drive
to display a series of dots as shown in Table 1 . This is normal operation. Additionally, when the
option is connected, none of the keys on the built-in LED operator on the drive will work, except
for the STOP key. To disable the STOP key on the built-in LED operator, set parameter o2-02
(STOP Key Function Selection) to 0 (Disabled).
Table 1 Built-in LED Display When Option is Connected to a V1000
<1> Eight languages (English, Japanese, German, French, Italian, Spanish, Portuguese, Chinese) are available when
using one of the following devices:
• An A1000 with drive software version PRG: 1018 or later and option with software version PRG: 0101.
• An A1000 with drive software version PRG: 1017 or later and option with software version PRG: 0101 or later.
• A1000 models 4A0930 or 4A1200
• V1000
<2> Language support is limited to English, Japanese, and Chinese when using the option with software version PRG:
0101 in combination D1000 or R1000.
Display LED Display Drive Status
Illuminated During Stop
Flashing During Run