Yaskawa JVOP-180 LCD - Manual (Page 11)

3 Receiving
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual 11
Table 4 Item Names and Part Numbers (Sold Separately)
◆
Tool Requirements
The tools listed in Table 5 are required to install the option on an enclosure panel door.
Table 5 Required Tools
Item Yaskawa Part Number Notes Page
Digital Operator Cable 1 m (3 ft.) <1>
<1> Digital Operator Cable: Used to connect the digital operator to the drive (sold separately).
<2> Use Installation Support Kit B when weld studs are on the back of the panel.
WV001
Part number for the Americas:
UWR0051
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
26
Digital Operator Cable 3 m (10 ft.) <1>
WV003
Part number for the Americas:
UWR0052
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
26
Installation Support Kit A
EZZ020642A
Sold Separately;
For use with holes through the
panel
25
Installation Support Kit B <2>
EZZ020642B
Sold Separately;
For use with panel-mounted
threaded studs
25
Installation Location Installation Support Required Tools
External/Face Mount – Phillips screwdriver, M3
Internal/Flush Mount
Installation Support Kit A Phillips screwdriver, M3, M4
Installation Support Kit B
Phillips screwdriver, M3
Box end or adjustable wrench, M4