SMA SB 4200TL Multi-String - Manual (Page 48)

Technical Documentation SMA Technologie AG
Page 48 SB4200-12:FE4804 Operating Instructions
Table 6.1: Operating Parameters of the Sunny Boy 4200TL (changeable)
The following parameters appear in the parameter list but cannot be modified:
Table 6.2: Operating Parameters of the Sunny Boy 4200TL Multi-String (fixed)
Speicherfunktion
Memory Function Default
parameter/
Reset
Operating
Data/
Reset Failure
none Default parameter: Sets all parameters to
default.
Reset Operating Data: Sets all parameters that
are visible in user level to default values.
Reset Failure: Resets all permanent device
disable (dBh)
Default GER/
ENS
Used for adjusting the parameters country
specific settings
Storage permanent/
volatile
perma-
nent
permanent: changed parameters are stored in
EEPROM and are still available after
restarting the Sunny Boys
volatile: prevents storing the parameters in
EEPROM,
i. e. parameters are only saved until next
startup
Inst.-Code The parameters concerning anti-islanding can
only be changed after entering the installers
password here.
Name Unit Range Default Description
Plimit W 5100 Upper limit of AC output power
SMA-SN Serial Number of the Sunny Boy
Software-BFR Firmware version of the operation control unit
(BFR)
Software-SRR Firmware version of the current control unit
(SRR)
Hardware-DC-
BFR Hardware version of the DC converter control
unit (DC -BFR)
Firmware-DC-BFR Firmware version of the DC converter control
unit (DC -BFR)
Name Unit Range Default Description