Everpure QC7I Single-MH2 - Manual (Page 54)

Customer Service / Technical Support: 800.942.1153 / 630.307.3000 n Fax: 800.942.0081 / 920.803.3805 52
EVP123
Direct Injection Steam up to 12 Grains of Hardness
EV4339-14 with a Single System
System
ƒ Claris XXL ‡ EV4339-14
ƒ Claris Head 3/8-inch QCF*
EV4339-23
Cartridge and head are sold separately.
Compatible With
ƒ Rapid Flash Steamers 2 kW-3 kW
ƒ Proofers, small flash steamers
4 kW-10kW
ƒ Medium flash steam and combi
11 kW – 24 kW
* Also available in 1/4-inch
QCF and 3/8-inch BSP.
‡ Note: If chloride or
silica is present in influent
water supply, consult
factory prior to installing
filtration.
Boiler & Direct Injection Steam greater than 12 Grains of Hardness
EV9970-20 MRS-350-BL with Tank
For use in hard water areas and with boilerless steamers
Compatible With
ƒ Gas boiler systems up to 175K
BTU (requires 40 gallon tank)
ƒ Gas boiler systems greater than
175K BTU (requires 80 gallon
tank)
ƒ Electric boiler systems up to 48
kW (requires 40 gallon tank)
ƒ Electric Boiler systems
48 kW & greater (requires
80 gallon tank)
ƒ All Boilerless Systems:
For tank sizing, contact Everpure
Technical Service
Water Requirements
ƒ > 12.0 grains/gallon hardness
System
ƒ EV9970-20 MRS-350 BL
with appropriate sized tank;
order tank separately
Replacement Cartridges
ƒ EV9627-04 7TO-BW
(1 ea)
ƒ EV9627-07 MR-350 (1 ea)
ƒ EV9668-24 BW-4400
(1 ea)
Tanks
ƒ CH30865-1 40 gallon tank
ƒ CH31054-1 80 gallon tank
Steamers, Combi Ovens Sizing Guide
These sizing recommendations
are merely general guidelines. For
exact sizing by Manufacturer and
model number, please contact
Everpure Technical Service:
[email protected]
or 800.942.1153.