Ice machines sizing guide, Evp123, Single ice makers – Everpure QC7I Single-MH2 User Manual
Page 47: Ice makers, Single pf-i2000, System

Customer Service Email: cseverpure
@
pentair.com
n
Technical Support Email: servicespecialist
@
pentair.com
45
EVP123
*For chloramine removal, contact Everpure Technical Service. For assistance with any ice maker not listed here, call Everpure at 800.942.1153
MicroPure II – A precoat filter with AgION antimicrobial compound that inhibits the growth of
bacteria. As water passes through the filter, the carbon adsorbs chlorine, off-tastes and odors, and
AgION works to inhibit any bacterial growth.
Ice Machines Sizing Guide
Single Ice Makers
EV9324-21 Insurice
®
Single PF-i2000
2
System
Built-in prefilter removes sediment and coarse dirt particles
Cubers: <650 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic
Flakers: <1500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman
Replacement Cartridges
EV9534-26 EC210
Prefilter (1 ea)
EV9612-22 i-2000
2
System available without prefilter: EV9324-01 Insurice Single
EV9324-22 Insurice Twin PF-i2000
2
System
Built-in prefilter removes sediment and coarse dirt particles
Cubers: 650–1200 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman
Cubers: up to 650 lbs/day
Hoshizaki
Flakers: 1500–2500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman
Replacement Cartridges
EV9534-26
EC-210
Prefilter (1 ea)
EV9612-22
i-2000
2
(2 ea)
System available without prefilter: EV9324-02 Insurice Twin
EV9325-23 Insurice Triple PF-i4000
2
System
Built-in prefilter removes sediment and coarse dirt particles
Cubers: 1200–1600 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman
Cubers: 650–1150 lbs/day
Hoshizaki, Vogt
Flakers: 2500–3500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman
Replacement Cartridges
EV9534-26 EC-210
Prefilter (1 ea)
EV9612-32
i-4000
2
(3 ea)
System available without prefilter: EV9325-03 Insurice Triple
†
†
†
Ice Makers
Flake & Cube Models
High and Low Flow Rate Machines:
Most problems with ice makers are
water related (70% by manufacturers’
estimates). Clean up the water and
clean up most maintenance problems!
Chief Offenders:
Dirt: Wears pumps, blocks
solenoids, pits evaporators.
Chlorine*: Gas corrodes stainless
parts, surfaces rust.
Scale Buildup: Coats evaporator,
slows harvest, lowers production,
increases energy usage.
Solution:
Everpure Insurice Systems:
Provide excellent flow rates for
even largest machines.
Remove dirt particles down to
1/2 micron in size.
Reduces chlorine, prevents rusting
of stainless parts.
Reduces lime scale buildup that
will cause poor ice production and
freeze-up.
Sizing Ice Machines by
Brand & Series/Capacity:
If you know the manufacturer
and the “size” of the ice maker,
EVP 1-2-3 will point you to
the correct filter system or
replacement cartridge.
These sizing recommendations
are merely general guidelines. For
exact sizing by Manufacturer and
model number, please contact
Everpure Technical Service:
or 800.942.1153.