SMA RS485-Quick Module - Manual (Page 24)

Assembly SMA America, LLC
24 RS485-QM-IA-eng-IUS111610 Installation Guide
3. Slacken the strain relief screw in a counterclockwise
direction.
4. Remove the jumper.
5. Remove the filler-plug from the right-hand cable
entry.
6. If two cables are to be connected: remove the filler-
plug from the left-hand cable entry.
7. Remove the cable support sleeve.
8. Insert the cable in the cable support sleeve.
9. Lead the end of the cable through the cable entry and
into the RS485-Quick Module.
10. Insert the cable support sleeve in the enclosure of the RS485-Quick Module.
11. Open the spring-type terminals.