SMA RS485-Quick Module - Manual (Page 16)

Preparations for the RS485-Quick Module SMA America, LLC
16 RS485-QM-IA-eng-IUS111610 Installation Guide
8. Push the RS485-Quick Module upwards.
9. Close SMA DC-Disconnect (see section 5.8 „Closing the SMA DC-Disconnect and
Commissioning the Inverter“ (page 28)).
☑ The installation country, display language, and Bluetooth communication are set.
4.3.2 Communication via Bluetooth
Communication via Bluetooth with a communication device is activated ex works. Networking via
Bluetooth with other inverters is deactivated ex works.
Possible settings using the rotary switch "C":
The NetID helps distinguish PV plants with SMA Bluetooth that are within a proximity of 1640 ft.
(500 m) of each other.
Detect a free NetID before commissioning your Bluetooth PV plant. This way you will make sure that
you will not register any other Bluetooth PV plant in your proximity. Refer to the user manual of the
"Sunny Explorer" software to discover how to detect a free NetID. The user manual of the
"Sunny Explorer" program can be found in the download section at www.SMA-America.com.
Switch position (NetID) Setting
0 Off
1 Bluetooth communication with a communication device is possible. No
networking with other inverters (default setting)
2 ... F Networking with other inverters