SMA SB 3300TL - Manual (Page 47)

SMA Technologie AG Technical Documentation
Operating Instructions SB3300TL-11:FE1905 Page 43
The following parameters appear in the parameter list but cannot be modified:
Speicherfunktion
Memory Function Default
parameter/
Reset
Operating
Data/
Reset Failure
none Default parameter: Sets all parameters to
default.
Reset Operating Data: Sets all parameters
visible in user level to default values.
Reset Failure: Resets all permanent device
failure (dBh)
Default GER/
ENS
Used for adjusting the country specific settings
Storage permanent/
volatile
perma-
nent
permanent: changed parameters are stored in
EEPROM and are still available after
restarting the Sunny Boys
volatile: prevents storing the parameters in
EEPROM,
i. e. parameters are only saved until next
startup
Inst.-Code The parameters concerning anti-islanding can
only be changed after entering the installers
password here.
Name Unit Range Default Description
Plimit W 3300 Upper limit of AC output power
SMA-SN Serial Number of the Sunny Boy
Software-BFR Firmware version of the operation control unit
(BFR)
Software-SRR Firmware version of the current control unit
(SRR)
Hardware-DC-
BFR Hardware version of the DC converter control
unit (DC-BFR)
Firmware-DC-BFR Firmware version of the DC converter control
unit (DC-BFR)
Name Unit Range Default Description