SMA SB 2800i Installation - Manual (Page 23)

Installation Guide Installation
SB2800i-11:SE0504 SMA Regelsysteme GmbH 21
5.3 Activation
You can activate the Sunny Boy 2800i when:
• The AC (grid) cable has been correctly connected.
• All the DC (PV) strings have been connected and all unused
DC plug connectors on the underside of the inverter have
been closed with the protecting caps.
• The lid has been tightly screwed on.
Proceedings for activation
1. Switch the circuit breaker on.
2. Check whether the LEDs indicate trouble-free operation of the
Sunny Boy 2800i based on the following table. If this is the
case commissioning has been successfully completed.
.