SMA SB 2800i Installation - Manual (Page 11)

Installation Guide Requirements for the Installation
SB2800i-11:SE0504 SMA Regelsysteme GmbH 9
4 Requirements for the Installation
Please make sure to fulfill all conditions below before installing
and commissioning the Sunny Boy.
4.1 Requirements: Mounting Place
The Sunny Boy 2800i has a relatively high weight of 31 kg.
Please keep this in mind when selecting the place where and how
to mount the Sunny Boy.
The ambient temperature should be within -25 °C
and + 60 °C.
The Sunny Boy 2800i is only for inside installation. It should be
mounted in a place whithout high temperatures - otherwise this
may reduce the yield of the PV plant.
It can be mounted straight or to the back. To ensure optimum
energy yield and easy operation it should be mounted straight
and on eye level.
Important for the selection of the location:
Unintended removal of the Multi-Contact ®
snap-cable connectors can damage the
connectors and even result in serious injuries.
Install the Sunny Boy in a place where an
unintended removal of the Multi-Contact
®
connectors (e. g. by children) is not possible.
Some parts of the Sunny Boy can reach
temperatures over 80 °C. Keep a suitable
distance to flammable materials!
Never install the Sunny Boy in areas that likely
contain explosive athmospheres (battery
rooms, fuel storage rooms etc.)!
Install the Sunny Boy 2800i in a fairly dust free
environment.
31 kg